Dental clinicDelivered
The Shine Dental
White Rock, BC
Oberizon Construction
Healthcare Construction
Clinical space answers to CSA Z8000 and IPAC barriers, not standard commercial code alone.
- Building since 2021
- Licensed & fully insured
- 35+ delivered projects
The short answer
What does it cost?
Operatory clearances, suction runs and sterilization separation are planned first. Patient and staff flow follow from them.
2026 range
$375,000 – $800,000
$150–$320 per sq ft turnkey — typically $375k–$800k for a 2,500 sq ft space.
That is the published range. Set your own square footage and finish level for a number against your actual space — no form to see the result.
Estimate your buildWhat's included
Scope of the work.
Healthcare projects managed around compliance, equipment, service locations, patient flow, and operational readiness.
- Clinical layout and service coordination
- Equipment, millwork, plumbing, and electrical planning
- Inspection, deficiency, and handover management
The work
Builds we have delivered.
Dental clinicDelivered
Marshall Road dental clinic
104-33069 Marshall Road, Abbotsford, BC
Med spaDelivered
Skinholic Aesthetics
Abbotsford, BC
Where we build it
Healthcare Construction across the Lower Mainland.
Managed from the White Rock office. Pick your city for local detail, pricing and the projects nearest you.
Guides
What we have written about this.
Cost, timeline and permit detail for healthcare construction, with the numbers left in.
Choosing a Contractor
Vancouver contractors compared
Four Vancouver healthcare and commercial contractors compared on what each one publishes about itself, with sources — plus how to vet any contractor before you sign.
11 min read
Design & Materials
Best flooring for clinics
The best flooring for medical and dental clinics, zone by zone — why welded sheet vinyl owns the clinical areas, where LVT and rubber belong, and the installation details that decide lifespan.
9 min read
Clinic & Build Types
Modular vs traditional clinic build-outs
Modular vs. traditional clinic construction compared honestly — where volumetric modular can physically go, why it saves schedule rather than money, and the prefab middle ground leased clinics actually use.
9 min read
Clinic & Build Types
Veterinary clinic construction
How veterinary clinic construction differs from medical clinic build-outs — washdown finishes and drains, kennel acoustics, species-separated waiting, and the CVBC accreditation path.
9 min read
Permits & Compliance
CSA Z8000 compliance checklist
A CSA Z8000 compliance checklist for healthcare facility construction in BC — space planning, infection control, ventilation, and what to verify before drawings.
10 min read
Choosing a Contractor
10 questions for a healthcare contractor
The ten questions to ask a healthcare construction contractor in BC before you shortlist, what a good answer sounds like, and how to compare bids that priced different scopes.
11 min read
Clinic & Build Types
Physiotherapy & med spa build-out
Physiotherapy clinic construction and med spa construction in BC — why open rehab floor and enclosed treatment rooms sit at opposite ends of the same cost band.
9 min read
Leases & Planning
Clinic lease checklist
A 12-point clinic lease checklist covering the buildout issues that cost the most when they surface after signing rather than before.
9 min read
Where to go next
Also built in the Lower Mainland.
Dental Clinic ConstructionChoose this if you need to build a dental clinic with operatories, sterilization, services, millwork, and equipment planned early.Dental Office RenovationChoose this if you need to renovate a dental office while protecting workflow, patient experience, and technical service requirements.Medical Clinic ConstructionChoose this if you need to build a medical clinic with exam rooms, reception, services, privacy, and staff workflow coordinated.Commercial ConstructionChoose this if you need to hire a commercial construction company with clear scope, budget, and schedule control.Commercial RenovationChoose this if you need to renovate an active or upcoming business space without losing control of schedule or cost.
Questions
Frequently asked.
What is healthcare construction?
Build-outs for clinical spaces governed by CSA Z8000 and IPAC infection-control barriers, not standard commercial code alone.
How much does healthcare construction cost?
$150–$320 per sq ft turnkey — typically $375k–$800k for a 2,500 sq ft space. Base-building condition and finish level move that number most.
Where does Oberizon deliver healthcare construction?
Across the Lower Mainland from a White Rock head office, covering 14 cities from White Rock out to Chilliwack.
What should I have ready before starting?
The address, your lease stage and a target opening date. Drawings and a budget range help. The more we know early, the tighter the feasibility comes back.
Book a Consultation
Planning healthcare construction? Tell us the space.
Tell us the space and the timeline. We will come back with what has to be planned before construction starts — anywhere from White Rock to Chilliwack.